Possible System Memory Allocation & Availability
System Device
Size
Firmware Hub
1 MB
flash memory
(System BIOS)
Local APIC
4 KB
Area Reserved
2 MB
for the chipset
I/O APIC (4
4 KB
Kbytes)
PCI Enumeration
256 MB
Area 1
PCI Express (256
256 MB
MB)
PCI Enumeration
512 MB
Area 2 (if needed)
-Aligned on 256-
MB boundary-
VGA Memory
16 MB
TSEG
1 MB
Memory available
to BIOS, OS,
applications
To Install:
Insert module verti-
cally and press down
until it snaps into
place. Pay attention
to the notch.
To Remove:
Use your thumbs to
gently push each
release tab outward
to release the DIMM
from the slot.
Note To Microsoft Windows Users
Microsoft implemented a design change in Windows XP with Service Pack
2 (SP2) and Windows Vista. This change improves driver compatibility,
but however reduces the available memory compared to what is physically
insalled. For more information, please read the following article at Microsoft's
Knowledge Base website at: http://support.microsoft.com/kb/888137.
Physical Memory
Remaining (-Available)
(3 GB Total System Memory)
3.00
3.00
3.00
3.00
3.00
3.00
3.00
2.85
2.84
2.84
Installing a DIMM Module into a Slot
Notch
Front View
Note: Notch should align
with the receptive key
Release Tab
point on the slot.
2-7
Chapter 2: Installation
Physical Memory
Remaining (-Available)
(4 GB Total System Memory)
3.99
3.99
3.99
3.99
3.76
3.51
3.01
2.85
2.84
2.84
Notch
Release Tab