Table of Contents
Advertisement
PDSML-LN1+/PDSML-LN2+/PDSML-E+ User's Manual
I/O Device Configuration
Access the submenu to make changes to the following settings.
KBC Clock input
This setting allows you to set the clock frequency for the Keyboard Clock. The
options are 6MHz, 8MHz, 12 MHz, and 16MHz.
Serial Port A
This setting allows you to decide how Serial Port A is controlled. The options are
Enabled (user defined) and Disabled.
Base I/O Address
This setting allows you to select the base I/O address for Serial Port A. The
options are 3F8, 2F8, 3E8, and 2E8.
Interrupt
This setting allows you to set the Interrupt for Serial Port A. The options are
IRQ3 and IRQ4.
Serial Port B
This setting allows you to decide how Serial Port B is controlled. The options are
Enabled (user defined) and Disabled.
Mode
This feature allows the user to set the mode for Serial Port B. The options are
Normal, IR and ASK-IR.
Base I/O Address
This setting allows you to select the base I/O address for Serial Port B. The
options are 3F8, 2F8, 3E8 and 2E8.
Interrupt
This setting allows you to set the Interrupt for Serial Port B. The options are
IRQ3 and IRQ4.
Floppy Disk Controller
This setting allows you to assign control of the floppy disk controller. The options
are Enabled (user defined), Disabled, and Auto (BIOS and OS controlled).
Base I/O Address
This setting allows you to select the base I/O address for the Floppy port. The
options are Primary and Secondary.
4-14
Advertisement
Table of Contents
