Table of Contents
Advertisement
PDSML-LN1+/PDSML-LN2+/PDSML-E+ User's Manual
ACPI Mode
Use the setting to determine if you want to employ ACPI (Advanced
Configuration and Power Interface) power management on your system. The
options are Yes and No.
Enable Multimedia Timer
Set this to Yes support the High Performance Event timer for Windows XP/2003
and later. The settings are Yes and No.
Power Button Behavior
If set to Instant-Off, the system will power off immediately as soon as the user
hits the power button. If set to 4-sec., the system will power off when the user
presses the power button for 4 seconds or longer. The options are instant-off
and 4-sec override.
Resume On Modem Ring
Select On to "wake your system up" when an incoming call is received by your
modem. The options are On and Off.
Resume On PME#
Select On to control the System "Wake-Up" features from the PME# of a PCI
slot. The options are On and Off.
Power Loss Control
This setting allows the user to choose how the system will react when power
returns after an unexpected loss of power. The options are Last State, Stay
off, and Power On.
Watch Dog
If enabled, this option will automatically reset the system if the system is not
active for more than 5 minutes. The options are Enabled and Disabled.
Summary Screen
This setting allows you to Enable or Disable the summary screen which displays
the system configuration during bootup.
Memory Cache
Memory Cache
Choose Enabled to set the state of Cache Memory. The options are Enabled
and Disabled.
4-8
Advertisement
Table of Contents
