Supermicro PDSML-LN1 User Manual
  1. Manuals
  2. Brands
  3. Supermicro Manuals
  4. Motherboard
  5. Supero PDSML-LN1+
  6. User manual
Supermicro PDSML-LN1 User Manual

Supermicro PDSML-LN1 User Manual

Hide thumbs Also See for PDSML-LN1:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
PDSML-LN1
PDSML-LN2
USER'S MANUAL
Revision 1.1a

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PDSML-LN1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Supermicro PDSML-LN1

Summary of Contents for Supermicro PDSML-LN1

  • Page 1 PDSML-LN1 PDSML-LN2 USER’S MANUAL Revision 1.1a...
  • Page 2 The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates.

  • Page 3: Manual Organization

    MHz/800 MHz/533 MHz. The LGA 775 Pentium D/Pentium 4/Celeron D Processor is housed in a Flip-Chip Land Grid Array (FC-LGA4) package that interfaces with the motherboard via an LGA775 socket. The PDSML-LN1/PDSML-LN2 supports Intel Hyper-Threading (HT) Technology, EM64T Technology, Enhanced Intel SpeedStep Technology (EIST) and Matrix Storage Technology.

  • Page 4: Table Of Contents

    Checklist ..................... 1-1 Contacting Supermicro ................1-2 PDSML-LN1/PDSML-LN2 Image ..........1-3 PDSML-LN1/PDSML-LN2 Layout ..........1-4 PDSML-LN1/PDSML-LN2 Quick Reference ....... 1-5 Motherboard Features ................1-6 Intel E7230 (Mukilteo) Chipset: System Block Diagram ......1-8 Chipset Overview ................... 1-9 PC Health Monitoring ................... 1-10 Power Confi...
  • Page 5 Table of Contents Connecting Cables ..................2-13 ATX Power Connector ................2-13 Processor Power Connector ..............2-13 Serial Ports ....................2-14 Chassis Intrusion ..................2-14 Universal Serial Bus (USB) ..............2-15 GLAN (Ethernet Ports) ................2-15 ATX PS/2 Keyboard and Mouse Ports ............. 2-16 Speaker Connector ................
  • Page 6 PDSML-LN1/PDSML-LN2 User’s Manual Chapter 4: BIOS Introduction ....................... 4-1 Running Setup ....................4-2 Main BIOS Setup ..................... 4-2 Advanced Setup ....................4-7 Security Setup ....................4-18 Boot Setup ...................... 4-19 Exit ........................4-20 Appendices: Appendix A: BIOS POST Error Messages ..............A-1 Appendix B: BIOS POST Codes ................

  • Page 7: Chapter 1: Introduction

    Chapter 1: Introduction Chapter 1 Introduction Overview Checklist Congratulations on purchasing your computer motherboard from an acknowledged leader in the industry. Supermicro boards are designed with the utmost attention to detail to provide you with the highest standards in quality and performance. Please check that the following items have all been included with your motherboard.

  • Page 8: Contacting Supermicro

    PDSML-LN1/PDSML-LN2 User’s Manual Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: Super Micro Computer B.V.

  • Page 9: Pdsml-Ln1/Pdsml-Ln2 Image

    Chapter 1: Introduction PDSML-LN1/PDSML-LN2 Image Important Notes to the User • All images and layouts shown in this manual were based upon the latest PCB Revision available at the time of publishing. The motherboard you've received may or may not look exactly the same as the graphics shown in this manual.
  • Page 10 PDSML-LN1/PDSML-LN2 User’s Manual Motherboard Layout (not drawn to scale) JPW1 JPW2 Fan1 KB/MS Fan6/CPU Fan 8-pin PWR USB 1/2 CTRL2 E7230 LGA 775 Mukilteo (North Bridge) CTRL1 JLAN1 DIMM 1 DIMM 1A Fan3 DIMM 2 DIMM 2A JLAN2 Fan2 DIMM 3...

  • Page 11: Pdsml-Ln1/Pdsml-Ln2 Quick Reference

    Chapter 1: Introduction PDSML-LN1/PDSML-LN2 Quick Reference Jumpers Description Default Setting JBT1 CMOS Clear See Section 2-7 C1/JI C Bus to PCI Slots 1/2 Ena. Open (Disabled) Power Force-On Open (Disabled) JPG1 VGA Enable Pins 1-2 (Enabled) JPL1/JPL2 (*Note) Giga-bit LAN 1/2/3/4 Enable Pins 1-2 (Enabled)

  • Page 12: Motherboard Features

    PDSML-LN1/PDSML-LN2 User’s Manual Motherboard Features • Single Intel Pentium D (Dual-Core)/Pentium 4 Extreme Edition/Pentium 4/Celeron D LGA (Land Grid Array) 775 Processors at system bus speeds of 1066 MHz/800 MHz/533 MHz. • Hyper-Threading (HT), EM64T, Enhanced Intel SpeedStep (EIST) supported Using the EM64T Feature •...
  • Page 13 Chapter 1: Introduction • CPU 4-phase-switching voltage regulator • Status monitor for fan speed & System Overheat/Fan Fail LED/Control • Pulse Width Modulation Fan Control & Low noise fan speed control • Environmental temperature monitoring via BIOS, PWR-Up from AC PWR loss •...
  • Page 14 PDSML-LN1/PDSML-LN2 User’s Manual LGA775_PROCESSOR CK410 CLK VRM 10.1 V10.1 FSB: 1066/ 800/533MHz PCI-e x8 SLOT DDR2 PCIE_x8 DDR2_667/ E7230 CH_A1-2 533/400 CH_B1-2 PCI-e x8 SLOT PCIE_x4 PCIE_x1 PRI_IDE UDMA/100 Gb_LAN CF_HEADER PCIE_x1 Gb_LAN ICH-7R S-ATA/300 PCI_32 4 x SATA 8Mx16...

  • Page 15: Chipset Overview

    Pentium D Processors, is comprised of two primary components: the Memory Con- troller Hub (MCH) and the I/O Controller Hub (ICH7R). With the capabilities provided by the E7230 chipset, the PDSML-LN1/PDSML-LN2 provides the performance and feature-set required for the high-end UP Server market.

  • Page 16: Pc Health Monitoring

    Cores, Chipset Voltage, Memory Voltage , +3.3V, +5V, +5V Standby, +12V, and −12V (via SuperO Doctor III). Once a voltage becomes unstable, it will give a warning or send an error message to the screen. Users can adjust the voltage thresholds to defi...

  • Page 17: Acpi Features

    Chapter 1: Introduction SoftOff state, the ATX power supply provides power to keep the required circuitry in the system "alive." In case the system malfunctions and you want to turn off the power, just press and hold the power button for 4 seconds. The power will turn off and no power will be provided to the motherboard.

  • Page 18: Power Supply

    CPU, some are inadequate. A 2 amps of current supply on a 5V Standby rail is strongly recommended. The PDSML-LN1/PDSML-LN2 accommodates ATX power supplies. In addition to the 24-pin ATX power supply (JPW1), the 12V 8-pin (JPW2) connection is also re- quired to provide adequate power supply to the system.

  • Page 19: Chapter 2: Installation

    Chapter 2: Installation Chapter 2 Installation Electro-Static Sensitive Devices Electro-Static Discharge (ESD) can damage electronic com ponents. To prevent damage to your system board, it is important to handle it very carefully. The following measures are generally suffi cient to protect your equipment from ESD. Precautions •...

  • Page 20: Processor And Heatsink Installation

    PDSML-LN1/PDSML-LN2 User's Manual Processor, Heatsink and Fan Installation When handling the processor package, avoid placing direct pressure on the label area of the fan. (*Notes: 1. Always connect the power cord last and always remove it before adding, removing or changing any hardware components. Make sure that you install the processor into the CPU socket before you install the CPU heatsink.
  • Page 21 Chapter 2: Installation North Key 3. Locate Pin 1 on the CPU socket. (*Note: Pin 1 is the corner marked with a triangle). Please note that the North Key and the South Key are located vertically in the CPU housing. 4.
  • Page 22 PDSML-LN1/PDSML-LN2 User's Manual Installation of the Heatsink 1. Locate the CPU Fan on the mother- board. (Refer to the layout on the right for the CPU Fan location.) 2. Position the heatsink so that the heatsink fan wires are closest to the CPU fan and are not interfered with other components.

  • Page 23: Mounting The Motherboard In The Chassis

    Chapter 2: Installation 8. Repeat Step 6 to insert all four heatsink fasteners into the mounting holes. 9. Once all four fasteners are securely inserted into the mounting holes and the heatsink is properly installed on the moth- erboard, connect the heatsink fan wires to the CPU Fan connector.

  • Page 24: Installing Ddr Ii Memory

    Gently press down on the memory module until it snaps into place. Support The PDSML-LN1/PDSML-LN2 supports single/dual channel, ECC/Non ECC unbuffered DDR II 667/533/400 SDRAM. Both interleaved and non-interleaved memory are supported, so you may populate any number of DIMM slots.
  • Page 25 Chapter 2: Installation Possible System Memory Allocation & Availability System Device Size Physical Memory Remaining (-Available) (4 GB Total System Memory) Firmware Hub fl ash memory 1 MB 3.99 (System BIOS) Local APIC 4 KB 3.99 Area Reserved for the 2 MB 3.99 chipset...

  • Page 26: Control Panel Connectors/Io Ports

    PDSML-LN1/PDSML-LN2 User's Manual Control Panel Connectors/IO Ports The I/O ports are color coded in conformance with the PC 99 specifi cation. See Figure 2-3 below for the colors and locations of the various I/O ports. A. Back Panel Connectors/IO Ports Figure 2-3.

  • Page 27: Front Control Panel Pin Defi Nitions

    Chapter 2: Installation C. Front Control Panel Pin Defi nitions NMI Button NMI Button Pin Defi nitions (JF1) The non-maskable interrupt button Pin# Defi nition header is located on pins 19 and 20 Control of JF1. Refer to the table on the right Ground for pin defi...

  • Page 28: Hdd Led

    PDSML-LN1/PDSML-LN2 User's Manual HDD LED HDD LED Pin Defi nitions (JF1) The HDD LED connection is located Pin# Defi nition on pins 13 and 14 of JF1. Attach the hard drive LED cable here to display HD Active disk activity status (for any hard drives on the system, including SAS, Serial ATA and IDE).

  • Page 29: Oh/Fan Fail Led

    Chapter 2: Installation Overheat/FanFail LED OH/Fan Fail Indicator OH/Fan Fail LED Connect an LED cable to the OH/Fan Status Pin Defi nitions (JF1) Fail connection on pins 7 and 8 of JF1 State Defi nition Pin# Defi nition to provide advanced warning of chas- Normal sis overheating or system fan failure.

  • Page 30: Reset Button

    PDSML-LN1/PDSML-LN2 User's Manual Reset Button Reset Button Pin Defi nitions (JF1) The Reset Button connection is lo- Pin# Defi nition cated on pins 3 and 4 of JF1. Attach Reset it to the hardware reset switch on the Ground computer case. Refer to the table on the right for pin defi...

  • Page 31: Atx Power Connector

    +3.3V +3.3V The main power supply connector -12V +3.3V (JPW1) on the PDSML-LN1/PDSML- LN2 meets the SSI (Superset ATX) PS_ON specifi cation. You can only use a 24- pin power supply cable on the mother- board. Make sure that the orientation of the connector is correct.

  • Page 32: Serial Ports

    PDSML-LN1/PDSML-LN2 User's Manual Serial Ports Serial Port Pin Defi nitions (COM1/COM2) Two serial headers: COM1 (J31), Pin # Defi nition Pin # Defi nition COM2 are included on the mother- board. COM1 (J31) is a port located next to the VGA port. See the table on the right for pin defi...

  • Page 33: Universal Serial Bus (Usb)

    GLAN (Giga-bit Ethernet Ports) There is a G-bit (GLAN) Ethernet port on the PDSML-LN1 and two GLAN ports on the PDSML-LN2. The GLAN ports are located next to the VGA port on the IO backplane. The GLAN port accepts RJ45 type cables.

  • Page 34: Atx Ps/2 Keyboard And Mouse Ports

    PDSML-LN1/PDSML-LN2 User's Manual ATX PS/2 Keyboard and PS/2 Keyboard and Mouse Port Pin PS/2 Mouse Ports Defi nitions The ATX PS/2 keyboard and PS/2 Pin# Defi nition mouse are located next to the Back Data Panel USB ports on the motherboard.

  • Page 35: Fan Headers

    Chapter 2: Installation Fan Headers Fan Header Pin Defi nitions The PDSML-LN1/PDSML-LN2 has six (Fan1-5) fan connections (Fan1 to Fan6). Fan6 Pin# Defi nition is designated as the CPU Cooling Fan. Ground (Black) (*Note: all these fans are 4-pin fans.

  • Page 36: Wake-On-Ring

    PDSML-LN1/PDSML-LN2 User's Manual Wake-On-Ring Wake-On-Ring The Wake-On-Ring header is located Pin Defi nitions at JWOR. This function allows your (JWOR) computer to to be "awakened" by an Pin# Defi nition incoming call to the modem when in Ground (Black) suspend state. See the table on the Wake-up right for pin defi...

  • Page 37: Vga Connector

    Chapter 2: Installation VGA Connector A VGA connector (JG1) is located next to the COM1 port on the IO backplane. Refer to the board layout below for the location. Power LED PWR LED Pin Defi nitions The Power LED connector is desig- Pin# Defi...

  • Page 38: Jumper Settings

    PDSML-LN1/PDSML-LN2 User's Manual Jumper Settings Explanation of Jumpers To modify the operation of the motherboard, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the connector. Pin 1 is identifi ed with a square solder pad on the printed circuit board.

  • Page 39: Cmos Clear

    Chapter 2: Installation CMOS Clear JBT1 is used to clear CMOS. Instead of pins, this "jumper" consists of contact pads to prevent the accidental clearing of CMOS. To clear CMOS, use a metal object such as a small screwdriver to touch both pads at the same time to short the connection.

  • Page 40: Power Force On Enable

    PDSML-LN1/PDSML-LN2 User's Manual Power Force On Enable/ Power Force On Disable Enable/Disable Jumper Settings (JPF) Jumper JPF allows you to enable Jumper Setting Defi nition (force on) or disable the Power Force Open Normal On function. If enabled, the power will...

  • Page 41: Onboard Indicators

    (Rear View: when viewing from the rear side of the chassis.) There are two GLAN ports on the PDSML- GLAN Activity LED LN2 and a GLAN port on the PDSML-LN1. Connection Speed Indicator Each Gigabit Ethernet LAN port has two LED Color Defi...

  • Page 42: Floppy, Hard Disk Drive, And Ipmi 2.O Connections

    PDSML-LN1/PDSML-LN2 User's Manual Floppy, Hard Disk Drive, and IPMI 2.0 Connections Note the following when connecting the fl oppy and hard disk drive cables: • The fl oppy disk drive cable has seven twisted wires. • A red mark on a wire typically designates the location of pin 1.

  • Page 43: Ide Connectors

    Chapter 2: Installation IDE Connector IDE Drive Connectors Pin Defi nitions (IDE) There is one IDE Connector (J3) on the Pin# Defi nition Pin # Defi nition motherboard. See the table on the right Reset IDE Ground for pin defi nitions. Host Data 7 Host Data 8 Host Data 6...
  • Page 44 PDSML-LN1/PDSML-LN2 User's Manual Notes 2-26...

  • Page 45: Chapter 3: Troubleshooting

    Chapter 3: Troubleshooting Chapter 3 Troubleshooting Troubleshooting Procedures Use the following procedures to troubleshoot your system. If you have followed all of the procedures below and still need assistance, refer to the ‘Technical Support Procedures’ and/or ‘Returning Merchandise for Service’ section(s) in this chapter. Always disconnect the AC power cord before adding, changing or installing any hardware components.

  • Page 46: Memory Errors

    PDSML-LN1/PDSML-LN2 User's Manual NOTE If you are a system integrator, VAR or OEM, a POST diagnostics card is recommended. For I/O port 80h codes, refer to App. B. Memory Errors 1. Make sure that the DIMM modules are properly installed and fully seated in the slots.

  • Page 47: Frequently Asked Questions

    (408) 503-8000, option 2, or by fax at (408)503-8019. Frequently Asked Questions Question: What type of memory does my motherboard support? Answer: The PDSML-LN1/PDSML-LN2 supports up to 8 GB of unbuffered, ECC/ Non ECC, DDRII-677/533/400, two-way interleaved or non-interleaved SDRAM. See Section 2-4 for details on installing memory.

  • Page 48: Returning Merchandise For Service

    PDSML-LN1/PDSML-LN2 User's Manual bootable device or USB pen to fl ash the BIOS. Then, your system will automati- cally reboot. If you choose the .exe fi le, please run the .exe fi le under Windows to create the BIOS fl ash fl oppy disk. Insert the fl oppy disk into the system you wish to fl...

  • Page 49: Chapter 4: Bios

    Chapter 4 BIOS Introduction This chapter describes the Phoenix BIOS™ Setup utility for the PDSML-LN1/ PDSML-LN2. The Phoenix ROM BIOS is stored in a fl ash chip and can be easily upgraded using a fl oppy disk-based program. Note: Due to periodic changes to the BIOS, some settings may have been added or deleted and might not yet be recorded in this manual.

  • Page 50: Running Setup

    PDSML-LN1/PDSML-LN2 User's Manual Running Setup *Default settings are in bold text unless otherwise noted. The BIOS setup options described in this section are selected by choosing the ap- propriate text from the main BIOS Setup screen. All displayed text is described in this section, although the screen display is often all you need to understand how to set the options (Refer to the next page).

  • Page 51: Main Bios Setup Menu

    Chapter 4: BIOS Main BIOS Setup Menu Main Setup Features System Time To set the system date and time, key in the correct information in the appropriate fi elds. Then press the <Enter> key to save the data. System Date Using the arrow keys, highlight the month, day and year fi...
  • Page 52 PDSML-LN1/PDSML-LN2 User's Manual Parallel ATA This setting allows the user to enable/disable the function of Parallel ATA and confi gure Parallel ATA settings. The options are Enabled and Disabled. Serial ATA This setting allows the user to enable or disable the function of Serial ATA. The options are Disabled and Enabled.
  • Page 53 Chapter 4: BIOS Primary IDE Master/Slave, Secondary IDE Master/Slave, or Primary IDE Master/Slave, SATA Port 1, SATA Port 2, SATA Port 3, SATA Port 4 These settings allow the user to set the parameters of Primary IDE Master/Slave and Secondary IDE Master/Slave slots. Hit <Enter> to activate the following sub- menu screen for detailed options of these items.

  • Page 54: Advanced Setup

    PDSML-LN1/PDSML-LN2 User's Manual Maximum Capacity: This item displays the maximum storage capacity of the system. LBA Format The following items will be displayed by the BIOS: Total Sectors: This item displays the number of total sectors available in the LBA Format.
  • Page 55 Chapter 4: BIOS Options for PIR settings are displayed by highlighting the setting option using the arrow keys and pressing <Enter>. All Advanced BIOS Setup options are described in this section. Boot Features Access the submenu to make changes to the following settings. Quick Boot Mode If enabled, this feature will speed up the POST (Power On Self Test) routine by skipping certain tests after the computer is turned on.
  • Page 56 PDSML-LN1/PDSML-LN2 User's Manual Enable Multimedia Timer Select Yes to enable support for the High Performance Event Timer for Win- dows® XP, Windows 2003 or later. The options are Yes and No. Power Button Behavior If set to Instant-Off, the system will power off immediately as soon as the user hits the power button.
  • Page 57 Chapter 4: BIOS Cache Video BIOS Area This setting allows you to designate a reserve area in the system memory to be used as a Video BIOS buffer to allow the BIOS to write (cache) its data into this reserved memory area. Select "Write Protect" to enable the function and this area will be reserved for Video BIOS ROM access only.
  • Page 58 PDSML-LN1/PDSML-LN2 User's Manual Discrete MTRR Allocation If enabled, MTRRs (-Memory Type Range Registers) are confi gured as distinct, separate units and cannot be overlapped. If enabled, the user can achieve better graphic effects when using a Linux graphic driver that requires the write- combining confi...
  • Page 59 Chapter 4: BIOS Large Disk Access Mode This setting determines how large hard drives are to be accessed. The options are DOS or Other (for Unix, Novelle NetWare and other operating systems). Advanced Chipset Control Access the submenu to make changes to the following settings. *Warning : Take caution when changing the Advanced settings.
  • Page 60 PDSML-LN1/PDSML-LN2 User's Manual Advanced Processor Options Access the submenu to make changes to the following settings: CPU Speed The feature allows the BIOS to display the CPU Speed. Frequency Ratio This feature allows the user to select the ration for the internal frequency multiplier of the CPU.
  • Page 61 Chapter 4: BIOS tems in one physical computer. The options are Enabled and Disabled. (*Note: If there is any change to this setting, you will need to power off and restart the system for the change to take effect.) Please refer to Intel’s web site for detailed information.
  • Page 62 PDSML-LN1/PDSML-LN2 User's Manual I/O Device Confi guration Access the submenu to make changes to the following settings. KBC Clock input This setting allows you to set the clock frequency for the Keyboard Clock. The options are 6MHz, 8MHz, 12 MHz, and 16MHz.
  • Page 63 Chapter 4: BIOS DMI Event Logging Access the submenu to make changes to the following settings. Event Log Validity This is a display to inform you of the event log validity. It is not a setting. Event Log Capacity This is a display to inform you of the event log capacity. It is not a setting. View DMI Event Log Highlight this item and press <Enter>...
  • Page 64 PDSML-LN1/PDSML-LN2 User's Manual Console Redirection Access the submenu to make changes to the following settings. COM Port Address This item allows you to specify which COM port to direct the remote console to: Onboard COM A or Onboard COM B. This setting can also be Disabled.
  • Page 65 Vcore, 1.5V, -12V, Vdimm, +3.3V, +12V, 5Vsb, 5VDD, P_VTT, Vbat *Note: In the Windows OS environment, the Supero Doctor III settings take pre- cedence over the BIOS settings. When fi rst installed, Supero Doctor III adopts the temperature threshold settings previously set in the BIOS. Any subsequent changes to these thresholds must be made within Supero Doctor, since the SD III settings override the BIOS settings.
  • Page 66 PDSML-LN1/PDSML-LN2 User's Manual Security Choose Security from the Phoenix BIOS Setup Utility main menu with the arrow keys. You should see the following display. Security setting options are displayed by highlighting the setting using the arrow keys and pressing <Enter>. All Security BIOS settings are described in this section.
  • Page 67 Chapter 4: BIOS Password on Boot This setting allows you to decide if a password is required for a user to enter the system at bootup. The options are Enabled (password required) and Disabled (password not required). Boot Choose Boot from the Phoenix BIOS Setup Utility main menu with the arrow keys. You should see the following display.

  • Page 68: Exit

    PDSML-LN1/PDSML-LN2 User's Manual Exit Choose Exit from the Phoenix BIOS Setup Utility main menu with the arrow keys. You should see the following display. All Exit BIOS settings are described in this section. Exit Saving Changes Highlight this item and hit <Enter> to save any changes you made and to exit the BIOS Setup utility.

  • Page 69: Appendix A: Bios Post Error Messages

    Appendix A: BIOS POST Messages Appendix A BIOS POST Messages and LED Indicators During the Power-On Self-Test (POST), the BIOS will check for problems. If a prob- lem is found, the BIOS will activate an alarm, turn on LED indicators, or display a message.
  • Page 70 PDSML-LN1/PDSML-LN2 User's Manual BIOS Messages Failure Fixed Disk Fixed disk is not working or not confi gured properly. Check to see if fi xed disk is at- tached properly. Run Setup. Find out if the fi xed-disk type is correctly identifi ed.
  • Page 71 Appendix A: BIOS POST Messages System CMOS checksum bad - Default confi guration used System CMOS has been corrupted or modifi ed incorrectly, perhaps by an application program that changes data stored in CMOS. The BIOS installed Default Setup Values. If you do not want these values, enter Setup and enter your own values.
  • Page 72 PDSML-LN1/PDSML-LN2 User's Manual System cache error - Cache disabled RAM cache failed and BIOS disabled the cache. On older boards, check the cache jumpers. You may have to replace the cache. See your dealer. A disabled cache slows system performance considerably.
  • Page 73 Appendix A: BIOS POST Messages Fixed Disk n Fixed disk n (0-3) identifi ed. Invalid System Confi guration Data Problem with NVRAM (CMOS) data. I/O device IRQ confl ict I/O device IRQ confl ict error. PS/2 Mouse Boot Summary Screen: PS/2 Mouse installed.
  • Page 74 PDSML-LN1/PDSML-LN2 User's Manual Parity Check 2 nnnn Parity error found in the I/O bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address, it displays ????. Press <F1> to resume, <F2> to Setup, <F3> for previous Displayed after any recoverable error message.

  • Page 75: Appendix Bbios Post Codes

    Appendix B: BIOS POST Codes Appendix B BIOS POST Codes This section lists the POST (Power On Self Test) codes for the PhoenixBIOS. POST codes are divided into two categories: recoverable and terminal. Recoverable POST Errors When a recoverable type of error occurs during POST, the BIOS will display an POST code that describes the problem.
  • Page 76 PDSML-LN1/PDSML-LN2 User's Manual POST Code Description 8254 timer initialization 8237 DMA controller initialization Reset Programmable Interrupt Controller 1-3-1-1 Test DRAM refresh 1-3-1-3 Test 8742 Keyboard Controller Set ES segment register to 4 GB Auto size DRAM Initialize POST Memory Manager...
  • Page 77 Appendix B: BIOS POST Codes POST Code Description Test RAM between 512 and 640 kB Test extended memory Test extended memory address lines Jump to UserPatch1 Confi gure advanced cache registers Initialize Multi Processor APIC Enable external and CPU caches Setup System Management Mode (SMM) area Display external L2 cache size Load custom defaults (optional)
  • Page 78 PDSML-LN1/PDSML-LN2 User's Manual POST Code Description Check for SMART Drive (optional) Set up Power Management Initialize security engine (optional) Enable hardware interrupts Determine number of ATA and SCSI drives Set time of day Check key lock Initialize typematic rate Erase <ESC> prompt Scan for <ESC>...
  • Page 79 Appendix B: BIOS POST Codes POST Code Description Unknown interrupt Check Intel Branding string Alert Standard Format initialization Late init for IPMI Log error if micro-code not updated properly The following are for boot block in Flash ROM POST Code Description Initialize the chipset Initialize the bridge Initialize the CPU...
  • Page 80 PDSML-LN1/PDSML-LN2 User's Manual Notes...

  • Page 81: Software Installation

    Appendix C: Software Installation Appendix C Software Installation After all the hardware has been installed, you must fi rst confi gure Intel's ICH7R SATA RAID* before you install the Windows Operating System and other software drivers. Important Notes to the User: *Note 1: If you do not wish to confi...
  • Page 82 PDSML-LN1/PDSML-LN2 User's Manual RAID Confi gurations The following types of RAID confi gurations are supported: RAID 0 (Data Striping): this writes data in parallel, interleaved ("striped") sections of two hard drives. Data transfer rate is doubled over using a single disk.
  • Page 83 Appendix C: Software Installation Using the Intel ICH7R SATA RAID Utility Program 1. Creating, Deleting and Resetting RAID Volumes: a. After the system exits from the BIOS Setup Utility, the system will automatically reboot. The following screen appears after Power-On Self Test. b.
  • Page 84 PDSML-LN1/PDSML-LN2 User's Manual Creating a RAID 0 Volume: a. Select "Create RAID Volume" from the main menu and press the <Enter> key. The following screen will appear: b. Specify a name for the RAID 0 set and press the <Tab> key or the <Enter> key to go to the next fi...
  • Page 85 Appendix C: Software Installation Creating a RAID 1 Volume: a. Select "Create RAID Volume" from the main menu and press the <Enter> key. The following screen will appear: b. Specify a name for the RAID 1 set and press the <Tab> key or the <Enter> key to go to the next fi...
  • Page 86 PDSML-LN1/PDSML-LN2 User's Manual Creating a RAID 10 (RAID 1+ RAID 0): a. Select "Create RAID Volume" from the main menu and press the <Enter> key. The following screen will appear: b. Specify a name for the RAID 10 set and press <Enter>.
  • Page 87 Appendix C: Software Installation Creating a RAID 5 Set (Parity): a. Select "Create RAID Volume" from the main menu and press the <Enter> key. The following screen will appear: b. Specify a name for the RAID 5 set and press <Enter>. c.
  • Page 88 PDSML-LN1/PDSML-LN2 User's Manual Deleting RAID Volume: (Warning: Be sure to back up your data before deleting a RAID set. You will lose all data on the disk drives when deleting a RAID set.) a. From the main menu, select item2-Delete RAID Volume, and press <Enter>.
  • Page 89 Appendix C: Software Installation Resetting to Non-RAID and Resetting a RAID HDD (Warning: Be cautious when you reset a RAID volume HDD to non- RAID or Resetting a RAID HDD. Resetting a RAID volume HDD or Resetting a RAID HDD will reformat the HDD and delete the internal RAID structure on the drive.) a.

  • Page 90: With Raid Functions

    PDSML-LN1/PDSML-LN2 User's Manual C-2 Installing the Windows XP/2000/2003 for systems with RAID Functions Installing A New Operating System (the Windows XP/2000/2003 OS) a. Insert the Microsoft Windows XP/2000/2003 Setup CD in the CD Driver, and the system will start booting up from CD.
  • Page 91 Appendix C: Software Installation C-3 Installing the Operating System and other Software Programs After all the hardware has been installed, you must fi rst install the operating system, and then other software drivers. The necessary drivers are all included on the Supermicro CDs that came with your motherboard.
  • Page 92 The Supero Doctor III program is a web-base management tool that supports remote management capability. It includes Remote and Local Management tools. The local management is called SD III Client. The Supero Doctor III program included on the CDROM that came with your motherboard allows you to monitor the environment and operations of your system.
  • Page 93 Supero Doctor III Interface Display Screen-II (Remote Control) *Note: SD III Software Revision 1.0 can be downloaded from our Web Site at: ftp://ftp.supermicro.com/utility/Supero_Doctor_III/. You can also download SDIII User's Guide at: http://www.supermicro.com/PRODUCT/Manuals/SDIII/UserGuide. pdf. For Linux, we will still recommend Supero Doctor II. C-13...
  • Page 94 PDSML-LN1/PDSML-LN2 User's Manual Notes C-14...
  • Page 95 (Disclaimer) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in signifi cant injury or loss of life or catastrophic property damage.

This manual is also suitable for:

Pdsml-ln2Supero pdsml-ln1Supero pdsml-ln2

Table of Contents