English Manual
5. C5 KVM Configuration options
All the options described in this section are entered in C5 KVM's configuration mode - see section 4.5 for
instructions on entering configuration mode.
5.1 Resetting all configuration options to their default state
To reset all the C5 KVM's configuration options to the default state press the following whilst within configuration
mode. By resetting all the configuration options to their default state you will also clear the password but you will
not change the video compensation setting.
F8 f
5.2 Selecting a mouse signaling protocol
Most mouse drivers are compatible with Microsoft mice and so a "Microsoft compatible" mouse signaling protocol is
suitable for most systems. In some installations, Logitech mouse drivers may disable the action of the mouse
buttons when used with the "Microsoft compatible" signaling protocol implemented by the C5 KVM. To solve this
problem select the "Logitech compatible" mouse signaling protocol.
M3 f
- Sets "Microsoft compatible" mouse protocol signalling.
M4 f
– Selects "Logitech compatible" mouse protocol signalling.
33
LINDY KVM Extender C5-Series
Installation and Use
page