Rack Mounting C5 Products In The 19 Inch Rack Mount Chassis; Mounting C5-Series Modules Into The Rack Mount Chassis - Lindy 39390 User Manual

English Manual
3. Rack mounting C5 Series products in the 19 inch rack mount chassis
3.1 Mounting C5 Series modules into the rack mount chassis
C5 Series products may be rack mounted in the C5 Series 19 inch rack mounting chassis (Part No. 39388). Up to
16 C5 Series modules may be mounted in each 2U chassis. You will need to purchase a rack securing plate for
each module that you wish to mount in the chassis. Part numbers for the rack securing plates are as follows:
Each rack securing plate is provided with two counter-sunk screws which may be used to attach the securing plate
to the C5 Series module.
1. Attach the securing plate to the module using the two counter-sunk screws provided.
2. Offer the assembly into the rack mounting chassis as shown in figure 10 and locate the module so that the two
pan head screws fit inside the mating fixing holes in the base of the rack mount chassis.
3. Use the pan head screw to attach the securing plate to the rack mount chassis.
LINDY KVM Extender C5-Series
C5 Series module
C5 KVM local transmitter
C5 Skew compensator unit
19 inch rack mount chassis
C5 Series
module
Figure 10 – Rack mounting C5 Series modules
Installation and Use
Rack securing plate
39360
39369
Rack securing
plate
M3 pan head screw
for fixing securing
plate to the rack
mount chassis
M3 pan head screw
for fixing securing
plate to the rack
mount chassis
page
27