Table of Contents
Advertisement
English Manual
4. Using the Extender C5
This section explains the general operation of the C5 KVM. We recommend that you read this section before
starting to use the product.
4.1 Power on status
The C5 KVM is ready for use as soon as the remote receiver and local transmitter have been powered on.
Remember that the local transmitter draws its power from the computer via the keyboard cable and the remote
unit draws its power from the supplied power adaptor.
If a security password has not been set then the C5 KVM remote unit will power on and immediately establish a
link to the remote computer attached to the local unit.
If a security password has been set then the C5 KVM remote unit will not display any video. The C5 KVM will
indicate that it is waiting for a password to be entered by alternately illuminating the num and scroll lock lights and
then the caps lock light on the keyboard attached to the remote receiver unit.
4.2 C5 KVM indicator lights
The C5 KVM local and remote unit indicator lights have the following meaning:
Status
ON
OFF
FLASHING
SLOW FLASHING
4.3 Keyboard NUM, CAPS and SCROLL lock indicators
The C5 KVM uses the keyboard NUM, CAPS and SCROLL lock lights to indicate various operating conditions as
follows:
NUM, CAPS and SCROLL lock lights flash in sequence
LINDY KVM Extender C5-Series
Meaning
C5 KVM is on and there is sufficient power available
C5 KVM is off and sufficient power is not available
C5 KVM is sending or receiving keyboard or mouse data
C5 KVM is in upgrade mode
Installation and Use
29
page
Advertisement
Table of Contents
