Table of Contents
Advertisement
English Manual
2.7 Setting the video compensation manually
The C5 KVM incorporates fine video compensation amplifiers to maximise the picture quality for any given length of
twisted pair cable. The C5 KVM can be set to automatically adjust the compensation amplifiers to match the cable
or you can adjust the amplifiers manually. Automatic compensation is enabled by setting option switch 4 on the
remote unit to the OFF position. Manual compensation is selected if switch 4 is in the ON position. The best video
compensation setting is often a matter of personal preference and so for the best picture quality we recommend
that you fine tune the amplifiers manually. To do this use the following procedure.
STEP 1
f
Enter video compensation mode by pressing the HOTKEYS together with
on the keyboard connected to the
remote receiver unit. The HOTKEYS are those that were set using the option switches (CTRL + SHIFT by default).
For example, assuming the default hotkeys, press these keys together:
b j f
STEP 2
The C5 KVM will now be in compensation adjustment mode. This is indicated by the NUM, CAPS and SCROLL
lock lights on your keyboard. These will flash in sequence at a rate that indicates the level of compensation: a slow
rate of flash indicates a compensation setting suitable for short lengths of twisted pair cable and a fast rate of flash
indicates a compensation setting that is suitable for long lengths of twisted pair cable.
20
LINDY KVM Extender C5-Series
Installation and Use
page
Advertisement
Table of Contents
