English Manual
STEP 3 (connecting the local transmitter)
Power down your computer. Disconnect the twisted pair cable from the local transmitter and connect the local
transmitter to your computer as shown below. You only need to connect the keyboard cable between the local
transmitter and the computer. Plug the monitor directly into the back of the computer.
STEP 4 (upgrading the local transmitter)
Set the C5 KVM's option switch 1 to the ON position. Insert the DOS disk into your computer's floppy drive and
power on your computer. The upgrade should be performed automatically. When the upgrade has completed,
switch off your computer and disconnect the local transmitter. Set option switch 1 back to the OFF position.
40
LINDY KVM Extender C5-Series
Installation and Use
page