Table of Contents
Advertisement
English Manual
Examples of common hotkey sequences (assuming CTRL + SHIFT hotkey option):
To lock the C5 KVM:
bjL
Press
To disable the video signal and blank the monitor:
bj0
Press
4.5 Entering and exiting video compensation/configuration mode
The C5 KVM's video compensation and user selectable options and functions are accessed in compensation /
configuration mode. To enter this mode press the selected hotkey combination together with the RETURN key and
to exit this mode press the RETURN key again. For example:
To enter compensation/configuration mode:
bjf
Press
To exit compensation/configuration mode:
f
f
Press
release
4.6 Setting and using the security password
There are many situations where unrestricted access to computers or sensitive information needs to be controlled.
In such circumstances, the C5 KVM local unit may be locked away in a room or secure cabinet and the computer
may be controlled remotely from the remote unit.
The C5 KVM incorporates a security password system that enables the remote unit to be locked so that the secure
computer cannot be controlled. Once a password has been set the C5 KVM remote unit may be disabled by
pressing the hotkeys together with the L (lock) key. The remote unit may only then be unlocked by entering the
password. For example if the hotkeys are set to CTRL and SHIFT then pressing the following key combination
would cause the C5 KVM remote unit to lock –
When the remote unit is locked the video is switched off and the keyboard and mouse are disconnected from the
computer. Locking the remote unit does not affect the operation of the local unit.
LINDY KVM Extender C5-Series
Lbj
release
0bj
release
fbj
release
bjL
Installation and Use
31
page
Advertisement
Table of Contents
