Table of Contents
Advertisement
English Manual
STEP 4
f
Press
to exit from compensation mode.
The C5 KVM saves the selected video compensation setting when you exit from compensation mode. This setting
is retained even when the power is off and so unless you change the twisted pair cable you will not need to re-
adjust the compensation setting again.
If automatic video compensation mode has been selected using option switch 4 then the C5 KVM will automatically
calculate and store a new compensation setting the next time the remote unit is powered on or reset. To stop this
happening and keep you're manually selected setting permanently, select manual compensation mode by setting
option switch 4 on the remote unit to the ON position.
2.8 Performing special functions and selecting user configurable options
The C5 KVM supports a number of special functions and user-configurable options. These functions and options
are accessed whilst the C5 KVM is in video compensation / configuration mode.
To enter configuration mode press the HOTKEYS together with
unit. The HOTKEYS are those that were set using the option switches (CTRL + SHIFT by default).
For example, assuming the default hotkeys, press these keys together:
Functions and options are accessed by pressing a letter key followed by a number key followed by the RETURN
key. For example to run the function that resets the C5 KVM to its factory default settings:
Whilst within configuration mode press
The num, caps and scroll lock lights will indicate correct acceptance of the command as follows:
•
In compensation / configuration the num, caps and scroll lock lights will flash in sequence.
•
After pressing the first key of a command sequence the num, caps and scroll lock lights will all be illuminated.
•
After pressing the second key of a command sequence the num and caps lock lights will be on and the scroll
lock light will be off.
•
After pressing RETURN the command will have been accepted and the num, caps and scroll lock lights will go
back to flashing in sequence.
When you have finished selecting options, return to normal operation by pressing
LINDY KVM Extender C5-Series
F 8 f
Installation and Use
f
on the keyboard connected to the receiver
b j f
f
22
page
Advertisement
Table of Contents
