Tools & Assembly Instructions - BLADEZ JetBikeGS Owner's Manual

TOOLS & ASSEMBLY INSTRUCTIONS
1 PC
Note: The following tools are included and are the only tools necessary for assembly
1. ATTACHING THE STABILIZER BARS
• Position the machine's rear stand on the Rear Stabilizer Bar (12), as shown in Fig
1, insert the Bolts (10), the Flat Washers (9) and Dome Nuts (8) and then tighten
securely.
• Position the Front Stabilizer Bar with wheels (16), paying attention with the wheels
facing forwards, as shown in Fig 1, insert the Bolts (10), the Flat Washers (9) and
Dome Nuts (8) and tighten securely.
• Unscrew the two Bolts (30) on the frame and position the Bottle Holder (29) then
secure with bolts.
14
TOOLS TO USE
S6 1PC
8
9
10
Figure 1
1PC
30
29