General Instructions; Attaching The Handlebar; Attaching The Pedals; Assembly Instructions - BLADEZ JET BIKE Owner's Manual

ASSEMBLY AND USE GUIDE CONTINUED

GENERAL INSTRUCTIONS

Carefully read through the instructions contained in this manual. It provides you with important
information about assembly, safety and use of the machine.
1. This unit has been designed for home use. The weight of the user must not exceed 220 lbs.
(100 kg.)
2. Keep your hands well away from any of the moving parts.
3. Parents and/or those responsible for children should always take their curious nature into
account and how this can often lead to hazardous situations and behavior resulting in
accidents. Under no circumstances should this appliance be used as a toy.
4. The owner is responsible for ensuring that anyone who uses the machine is duly informed
about the necessary precautions.
5. Your unit can only be used by one person at a time.
6. Use suitable clothing and footwear. Make sure all laces/cords are tied correctly. .

1. ASSEMBLY INSTRUCTIONS

The assistance of a second person is recommended when assembling this unit. Take the unit
out of its box and make sure that all of the pieces are there (Fig. 1):
1. (A) Main body; (B) Handlebar; (F) Seat; (I) Rear stabilizer bar with adjustable feet; (J) Front
stabilizer bar with wheels; (L) Left pedal; (R ) Right pedal; (10) Slot head bolt M10; (9) Flat
washer M10; (8) Cap nut M10; (30) Double ended spanner; (m) Bottle holder.

2. ATTACHING THE HANDLEBAR

Insert the handlebar stem (B) into the hole on the main body (A), Fig 2. Position it correctly and
then tighten knob (Y) by turning it clockwise.
3. ATTACHING THE STABILIZER BARS
1. Position the machine's rear stand on the rear stabilizer bar (I), as shown in Fig 3, insert the
bolts (10), fit the flat washers (9) and cap nuts (8) and then tighten securely.
2. Position the front stabilizer bar with wheels (J), paying attention to the red dots and with the
wheels facing forwards, as shown in Fig 3, insert the bolts (10), fit the flat washers (9) and
cap nuts (8) and tighten securely.

4. ATTACHING THE PEDALS

The assembly instructions for the pedals must be followed to the letter, attaching these
incorrectly could damage the screw thread on either the pedal or the crank.
Page 4