Table of Contents
Advertisement
Altos R920 Installation Configuration Guide
IOAT Driver Installation
The Base System Device with yellow mark in Device Manger is
the IOAT device. After the Gigabit Ethernet controller driver
installation completed at previous step, you would see Intel
7300 Chipset QuickData Technology Device listed in System
devices.
VGA Driver Installation
1.
Windows will treat onboard VGA as Standard VGA device.
You can find the ATI ES1000 driver in EasyBUILD. Please
insert the EasyBUILD into the optical drive.
2.
Expand Drivers -> Altos 920 -> Graphics adapters -> ATI
ES1000, select Windows Server 2008 x64 and click on Setup.
3.
Follow the instruction to install the VGA driver and
reboot the server after the driver is installed.
Gigabit Ethernet Driver Installation (I/O Expansion Module)
If the optional I/O Expansion module is installed on Altos
R920, there are two additional Gigabit Ethernet available on
Altos R920.
The driver for the two additional Gigabit Ethernet will be
installed automatically if you've installed the onboard
Gigabit Ethernet driver at previous step.
RAID Utility Installation
4.
Please insert the EasyBUILD into the optical drive.
5.
Expand Utilities -> Altos R920 -> Integrated SAS hardware
RAID, select RAID Web Console 2 (Windows) and click on
Setup.
6.
Follow the instruction and use the default setting to
complete the RAID Utility Installation.
Network Utility Installation
The PROSet utility for the onboard Gigabit Ethernet
controller will be installed automatically when you
installing the onboard Gigabit Ethernet driver.
Windows Server 2003 Enterprise x64 Edition (with
Integrated SAS Hardware RAID)
Below information describes how to manually install Windows
Server 2003 Enterprise x64 Edition on Altos R920 with
integrated SAS hardware RAID.
14
Advertisement
Table of Contents
