Table of Contents
Advertisement
Altos R920 Installation Configuration Guide
# modprobe ioatdma
# ll /sys/class/dma/
When IOAT driver installation completed, you could see
subdirectories and files for each subdirectory of
/sys/class/dma folder.
RAID Utility Installation
NOTE. Please install the
138.i386.rpm
and
compat-libstdc++-33-3.2.3-61.i386.rpm
packages with the CD #3 of Red Hat Enterprise Linux 5 EM64T
prior to install the RAID Web Console 2.
1.
You can find the RAID Web Console 2 in EasyBUILD 8.0
build 100. Please refer to directory of the RAID Web
Console 2 in Software Required section and copy the
utility from the EasyBUILD 8.0 build 100 to HDD first.
# mount /media/cdrecorder
# cp –R /media/cdrecorder/app/r920/Integrated_SAS/Linux/. /tmp
2.
Install RAID Web Console 2 utility
# cd /tmp/
# unzip ir3_Linux_RWC2_v2_19_01.zip
# chmod 755 install.sh
# chmod 755 RunRPM.sh
# ./install.sh
3.
Type y to accept the license agreen and select 1 for full
installation.
4.
To start RAID Web Console 2 on, select applications ->
System Tools -> RAID Web Console 2 Startup UI
Red Hat Enterprise Linux 5.0 (with Integrated SAS
Hardware RAID)
Below information describes how to manually install Red Hat
Enterprise Linux 5.0 on Altos R920 with integrated SAS
hardware RAID.
Drivers Required
For Red Hat Enterprise Linux 5.0 Installation, the following
device drivers are required.
Device
Onboard VGA
compat-libstdc++-296-2.96-
Version
EasyBUILD Version
N/A
Built-in
30
Advertisement
Table of Contents
