Table of Contents
Advertisement
Altos R920 Installation Configuration Guide
# cp –R /media/<easybuild>/Disk/R920/NIC/Intel/pro1000.lx/. /tmp
Or you can manually mount EasyBUILD 8.0 build 100 DVD
with the command:
# mount /dev/dvd /mnt
# cp –R /mnt/Disk/R920/NIC/Intel/pro1000.lx/. /tmp
2.
Remove the OS built-in NIC driver
# rmmod e1000.ko
3.
Change the directory to the driver source and install the
driver
# cd /tmp/src/
# make install
# insmod e1000.ko
Gigabit Ethernet Driver Installation (I/O Expansion Module)
If the optional I/O Expansion module is installed on Altos
R920, there are two additional Intel 82575EB Gigabit Ethernet
available on Altos R920.
1.
You can find the Intel 82575EB driver in EasyBUILD 8.0
build 100. Please refer to directory of the 82575EB
driver in Driver Required section and copy the driver
from the EasyBUILD 8.0 build 100 to HDD first.
The SUSE Linux Enterprise Server 10 can automatically
mount the EasyBUILD 8.0 build 100 DVD at
/media/<easybuild> folder when inserting the DVD media.
# cp –R /media/<easybuild>/Disk/R920/NIC/Intel/pro1000.lx/. /tmp
Or you can manually mount EasyBUILD 8.0 build 100 DVD
with the command:
# mount /dev/dvd /mnt
# cp –R /mnt/Disk/R920/NIC/Intel/pro1000.lx/. /tmp
2.
Change the directory to the driver source and install the
driver
# cd /tmp/src/
# make install
# insmod igb.ko
IOAT driver installation
1. Please remove the old version of IOAT driver from the
36
Advertisement
Table of Contents
