Oce TDS100 User Manual page 45

Lift the green handle and open the fuser unit
3.
[21] Open the fuser unit
[21] Open the fuser unit
Remove the jammed media carefully
4.
Make sure that you remove all jammed media.
Note:
Lift the green handle and close the fuser unit
5.
[22] Close the fuser cover
[22] Close the fuser cover
Close the left cover.
6.
Tighten the nut at the left back side.
Check on an original jam also and clear the original jam if necessary
7.
(see 'Clear an original jam' on page 41)
Turn on the Océ TDS100.
8.
Result
The media jam is cleared and the media indicator is off. The Océ TDS100 is
ready to copy.
Maintain the Océ TDS100 45