Oce TDS100 User Manual page 20

The indicators
Nr.
1
2
3
4
5
The keys
Nr.
6
7
8
9
20 User manual
Indicator
'Toner'
Green light
Red light
'Media jam'
Display
Key
'Media'
Exposure
Stop
Start
Function
Indicate that the Océ TDS100 has run out of
toner.
Indicate that the copier is ready.
A blinking green light indicates that the
copier runs a copy job.
Indicate that an error has occurred.
Indicate that the original or copy media
has jammed.
Display a message code.
Display the length of the original when
you copy manually on cut sheet media
manually
Function
Select the media type of the copy.
Select one of the following.
'Paper'
'Film'
Adjust the exposure.
Use the exposure setting to correct the
background of the copy. You can adjust the
exposure from -4 up to +4. A negative value
darkens the copy, a positive value lightens
the copy.
When you press the stop key while the
copier runs a copy job, the copy job will
stop.
When you pressthe stop keytwice while
you set up a copy job, the default values
return.
Start the copy job.