Straighten The Edge Of A Media Roll - Oce TDS100 User Manual

Straighten the edge of a media roll

Introduction
You can use the 'Cut' function to make the edge of a roll straight.
Before you begin
Remove the original from the original feed table.
How to cut the edge of a roll
Use the 'Feed' key to select a roll
1.
Use the 'Cut' key to select 'Standard'
2.
Press the upper side of the adjustment key.
3.
The text 'TEST' appears on the display.
Press the green start button to cut the edge of the roll.
4.
The message code 'E 3' appears on the display to indicate that you need to
remove the cut off strip.
Open the drawer to remove the cut off strip
5.
If the drawer does not contain the cut off strip, open the middle cover and
6.
remove the cut off strip
Close the middle cover if necessary
7.
Close the drawer.
8.
Result
The edge of the roll is straight.
34 User manual