Oce 7055 User Manual page 21

Adjusting the edge
Press the edge selection button to toggle between leading edge and trailing
1
edge (see figure 9 for an example).
The length display shows the length of the currently selected edge.
standard
synchro cut
[9] Trailing edge buttons
Press the edge adjustment buttons to change the size of the edge. Pressing the
2
'-' button decreases the size of the edge. Pressing the '+' button increases the
edge.
Be aware that decreasing the edges too much may result in a loss
Attention:
of information.
Copy jobs
- +
trailing
edge
leading
edge
21