Strongly curled originals have to be fed in carefully. In certain
Attention:
circumstances the copier can pull the original in.
[5] Feeding an original
Minimum length of the copy material is 420 mm.
Note:
Feed a sheet of copy material, in line with the original, into the copy feed table
5
in accordance with the guidelines (see figure 6 on page 18) .
The copy material is aligned in the nip of the rollers. By inserting the
Note:
material with an amount of slack, the leading edge is aligned in the nip. A delay
between insertion of the material and the start of the transport ensures proper
alignment.
Copy jobs
17