Clearing paper jams
When paper feeds incorrectly, the paper path indicator will flash.
Clearing a paper jam in the copy material feed section
Switch off the copier.
1
Lower the copy feed table, using the two catches on the front underneath the
2
copy feed table (see figure 27).
[27] Lowering the copy feed table
Remove the jammed copy material.
3
Attention:
unfused on some parts.
Check thoroughly that no scraps of material are left behind.
Note:
Close the copy feed table.
4
Switch on the copier.
5
42
Océ 7055/7056 User Manual
2473
Pull the sheet of paper backwards carefully, the sheet might be