Important Safety Instructions; Pre-Installation - Elite Screens Spectrum Series User Manual

VMAX2 & Spectrum Series
IM PORTAN T S AF ETY INS TRUC TIONS
1. Position the power cord so it will not be; near a hot surface, pulled at or tripped over.
2. To avoid suffering an electric shock, do not attempt to disassemble this appliance yourself. In the event of technical
trouble, please contact Elite Screens service dept. for help with repairing your screen.
3. Please disconnect the power supply when screen is not in use for a long period of time as should be done with any other
electric household appliance.
4. To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is obvious damage or the
presence of broken parts.
PRE -I NSTAL LATION
1. Carefully unpack the screen.
2. Always handle the screen in a leveled position on a clean surface.
3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign particles such as dust,
sawdust and liquids.
Keyhole for flush mounting to
wall(R5 MM,R2 MM)
1 1 m
φ
Built-In IR Receiver for IR
remote (Point and Press Up /
Stop/Down)
4"
3-5/8" Height of
end cap
Top key holes for ceiling
mounting(R3 MM,R2 MM)
φ6m
3-1/8" Width of
end cap
3-3/4"