Important Safety Instructions; Mounting Installation; Mounting Accessories - Elite Screens TE100HC2 User Manual

IMPORTANT SAFETY INSTRUCTIONS

Please read this guide prior to installation.
Make sure the current rating is equal to the appliance rating when an extension cord is
used.
Do not use any accessories not provided by the manufacturer. We will not be responsible
for any risks of fire, electric shock, or injuries resulting from the use of other accessories
not supplied by the manufacturer.
Make sure the screen is mounted in a horizontal level. We suggest consulting with a
professional such as a carpenter, or using a laser leveler.
INSTALLATION

MOUNTING INSTALLATION

Wall Mounting
I. Masonry Anchor is applied on concrete wall / ceiling; Plastic Plug is applied on wooden
wall / Ceiling.
II. Plastic Plug & wooden screw are applied to the wooden wall / ceiling for screen sizes
equal to or less than 120" inches (diagonal). Masonry anchor is for concrete wall / ceiling
installations and for screen sizes greater than 120" inches (diagonal).
III. Install the Alum Extruded Hanger Set onto the slide channel and move to the desired
position before it is screwed on tightly.

MOUNTING ACCESSORIES

A. Screw Nut (M10) x 4
B. Bolt x 2
C. Screw Nut (M6) x 4
D. Washer x 4
Warning:
These are standard accessories included with the
ceiling/wall brackets. Models may vary and anchors will not
support all models. Elite will not be liable for improper installation.
Cealing Mounting
*Allow 2"of spacing between the front and back of the screen casing.
E. Alum Extruded Hanger x 2
F. Masonry Anchor x 2
G. Plastic Plug x 2
H. Wooden Screw x 2
Ceiling Recessed Mounting
B
A
C
E
D
F
Upon assembly the
bracket will slide
into the casing rails
for mounting.
Rev. 1.1