Important Safety Instructions; Pre-Installation - Elite Screens VMAX2 User Manual

n · --------
-----_
....
-..-
....
_---
!E
lte
~~~;;,;;,!!!~
VMAX2 & Spectrum Series
IMPORTANT SAFETY INSTRUCTIONS
1. Position the power cord so it will not be; near a hot area or hot surface
2. To avoid suffering an eelectric shock, do not attempt to disassemble this appliance yourself. In the event of
technical trouble, please contact Elite Screens service dept. for help with repairing your screen.
3. Please disconnect the power supply when screen is not in use for a long period of time as should be
done with any other electric household appliance.
4.
To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is obvious
damage or the presence of broken parts.
PRE-INSTALLATION
1. Carefully unpack the screen.
2. Always handle the screen in a leveled position on a clean surface.
3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign particles
such as dust, sawdust and liquids.
Keyhole for flush mounting to
Wall (R5MMR2MM)
Built-In IR Receiver - for
IR remote ( Point and Press
Up/Stop/Down)
4"
3-5/8" Hight of
end cap
Top keyholes for ceiling
Mounting (R3MM,R2MM)
/
3-1/16"
3-1/8" Width of
end cap
o
www.elitescreens.com/eliteinfo@elitescreens.com