LifeSpan Control User Manual page 6

（4）"off"
Press this key to make machine stop working.
（5）"speed up"
Under running condition, press this key, speed can be speeded up to the one
you need.
（6）"speed down"
Under running condition, press this key, speed can be speeded down to the one
you need.
（7） "select"
Press this key, time, distance and calorie will be displayed.
（8）"set"
Under original mode, press this key, you can set a countdown time, a
countdown distance, a countdown calorie.
（9）"incline up"
Press this key, you can choose the incline you need, except for the alarm
condition.
（10）"incline down"
Press this key, you can choose the incline you need, except for the alarm
condition.
（11）"safety key"
Under urgent condition, pull this key, machine stops immediately.
（12）Speed Window
Press "fast' or "slow" , the window shows the results.
(13）"speed short cut key"
Under running condition, press this key, speed can be set to the value directly.
（14）"incline short cut key"
Press this key, the incline goes directly to the chosen height.
(15) Incline window
Press "incline-up", "incline-down" , this window shows the results .
(16) Time, distance, calorie and heart rate window
This window automatically .shows time, distance, calorie and hear rate
5.2 Unload operating
1) Insert power plug into the socket with earth wire, turn the switch to "1"
position which is on the frame.
2) Put the safe key in the right position, then circuit is on, press "on/off", keep
it run in unload condition. Do not let anyone run on the belt at this time .Test
the condition of running belt (testing from low speed to high ones), after
testing, press "on/off".
3) If everything is ok, then start to run.
5.3 Meter operating instruction
5.3.1
1) Insert power plug into the socket with earth wire, turn the switch to "1"
- 5 -