Grizzly H6146 Instruction Manual
  1. Manuals
  2. Brands
  3. Grizzly Manuals
  4. Nail Gun
  5. H6146
  6. Instruction manual

Grizzly H6146 Instruction Manual

34 clipped head framing nailer
Hide thumbs Also See for H6146:
Table of Contents

Advertisement

Quick Links

Download this manual
34° CLIPPED HEAD
FRAMING NAILER
MODEL H6146

INSTRUCTION MANUAL

COPYRIGHT © FEBRUARY, 2005 BY GRIZZLY INDUSTRIAL, INC.
REVISED DECEMBER, 2017 (HE)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#BL6906 PRINTED IN CHINA

Advertisement

Table of Contents
loading

Related Manuals for Grizzly H6146

Summary of Contents for Grizzly H6146

  • Page 1: Instruction Manual

    INSTRUCTION MANUAL COPYRIGHT © FEBRUARY, 2005 BY GRIZZLY INDUSTRIAL, INC. REVISED DECEMBER, 2017 (HE) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #BL6906 PRINTED IN CHINA...

  • Page 2: Safety Instructions For Pneumatic Tools

    SECTION 1: SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazard- ous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages.
  • Page 3 Regularly inspect tool for any con- tools lubricated and clean for best and dition that may affect safe operation. safest performance. Follow instructions Immediately repair or replace damaged or for lubricating and changing accessories. mis-adjusted parts before operating tool. H6146 34° Clipped Head Framing Nailer...

  • Page 4: Additional Safety Instructions For Nailers

    5. COMPRESSED AIR RATING: Do air to remain in the tool after it is dis- not connect the nailer/stapler to com- connected from the air source. pressed air that exceeds 120 PSI. H6146 34° Clipped Head Framing Nailer...
  • Page 5 Read the manual before operation. Become familiar with this nailer, its safety instructions, and its operation before beginning any work. Serious personal injury may result if safety or operational information is not under- stood or followed. H6146 34° Clipped Head Framing Nailer...

  • Page 6: Contact Info

    Foreword We are proud to offer this manual with your We stand behind our machines. If you new H6146 34º Clipped Head Framing have any service questions, parts requests Nailer! We've made every effort to be or general questions about the machine,...
  • Page 7 If any non-proprietary parts are missing (e.g., a nut or a washer), we will gladly replace them; or for the sake of expedien- cy, replacements can be obtained at your local hardware store. Figure 1. Model H6146 inventory. H6146 34° Clipped Head Framing Nailer...
  • Page 8 Compressed Air System The Model H6146 is designed to be oper- ated at 70-120 PSI using clean, dry, regu- lated, compressed air. DO NOT exceed the maximum operating pressure for your model. Before using your new nailer, regulate the air pressure on your air compressor to the Exceeding the maximum permissible minimum PSI for your model.

  • Page 9: Safety Yoke

    The safety yoke is a mechanical device that can fail. Never rely on the safety yoke mechanism as an excuse to point the nailer at yourself or any bystanders. Serious injury may occur. H6146 34° Clipped Head Framing Nailer...
  • Page 10 Figure 4. 2. To test for proper nail penetration, hold the nailer perpendicular to the surface of a piece of clean scrap wood that is thick enough for the length of nails you have loaded. H6146 34° Clipped Head Framing Nailer...

  • Page 11: Adjusting Depth

    Adjusting Depth section on this 5. Connect to the air. page. 6. Pull the trigger and depress the safety yoke mechanism on your workpiece to test the depth adjustment. H6146 34° Clipped Head Framing Nailer...
  • Page 12 Release the catch lever and let the pusher slide to the front of the maga- Locate and remove the jammed nail zine. with needle nose pliers. Release the catch lever and let the pusher slide to front of the magazine. H6146 34° Clipped Head Framing Nailer...
  • Page 13 12. For more assistance, or to install a port. complete O-ring set, refer to the appro- priate breakdown diagram in the back 4. Remove the top cap. of this manual. H6146 34° Clipped Head Framing Nailer...
  • Page 14 Use a good solvent to clean the nose Special oil has been included with your assembly of the nailer. Always be sure new Grizzly nailer to help maintain its that the nailer is dry before using it useful life. Place two to six drops of oil again.
  • Page 15 H6146 PARTS BREAKDOWN H6146 34° Clipped Head Framing Nailer...
  • Page 16 SAFETY GUIDE 89 PSB15M CAP SCREW M5-.8 X 20 45 PH6146045 PIN 3 X 25 90 PH6146090 1/4" NPT MALE CONNECT 46 PH6146046 COMPRESSION SPRING 91 PH6146091 AIR PLUG COVER 92 PW02M FLAT WASHER 5MM H6146 34° Clipped Head Framing Nailer...

  • Page 17: Troubleshooting

    1. Nail is jammed in maga- 1. Clear nailer magazine or zine or discharge area. discharge area. 2. Piston shaft is damaged. 2. Replace piston shaft. 3. Air pressure too low. 3. Check/increase air pres- sure. H6146 34° Clipped Head Framing Nailer...

  • Page 19: Warranty And Returns

    WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.

Table of Contents