Dear Installer - Stanley Supreme DF User Manual

Dear Installer

Before you start your installation, please complete the details BELOW.
If your customer has a problem relating to your installation they will be able to contact
you easily.
Thank you
Installer's Name
Installer's Company
Installer's Telephone number
You will only need the following equipment to complete the cooker installation satisfactorily.
STABILITY BRACKET
If the cooker is to be
supplied with gas through
a flexible hose, a stability
bracket or chain must be
fitted.
These are supplied not
with the cooker but are
available at most builders
merchants.
You will also need the following tools:
1. Electric drill
2. Masonry drill bit & rawlplugs
(only required if fitting the
cooker on a stone or concrete
floor)
3. Steel tape measure
4. Cross head screwdriver
GAS PRESSURE
TESTER
It is important the gas
pressure is set correctly.
5. Flat head screwdriver
6. Spirit level
7. Pencil
8. Adjustable spanner
9. Screws for fitting stability bracket
FLEXIBLE GAS HOSE
Must be in accordance
with the relevant
standards. For LP Gas it
should be suitable for
LPG, capable of 50 mbar
pressure, 70ºC
temperature rise and carry
a red stripe, band or label.
A hose is not supplied
with the cooker.
29
MULTIMETER
(for electrical checks)
Make sure the installation
is electrically safe.