LifeSpan TR5000i Owner's Manual page 35

Engineering Mode
Press STOP and then Speed up to enter the Engineering Mode. You can press Enter / Mode to
switch setup screens, or press STOP+Speed up to return to Standby Mode. The table below
shows the sequence of the setup screens.
Engineering function
Press and hold STOP and then Speed for 3 seconds to
enter Engineering Mode
(incline window shows software version)
Press Enter / Mode
Guard automatically pauses the unit if it detects the
treadmill is not being walked on. Press Speed / Incline
Press Enter / Mode to show Roller diameter
Press Enter / Mode to set up the units of measurement
in Metric (SI) or in English (EN).
Press Speed / Incline UP / DOWN to change
Press Enter / Mode to set up Calendar
Calendar Operation:
Press Enter / Mode to turn console sleep mode on
display lit all the time.
Press Enter / Mode for Distance
This is the total distance the treadmill has been run
in Miles or Kilometers depending on what mode the
treadmill is in.
Press Enter / Mode for Workout Time
This is the total number of hours the treadmill
has been used.
Press Enter / Mode again to return to the standby mode.
Information viewed on screen
Engineering Mode
150
2009.06.18
Intelli-Guard On
Roller
Select the units
En or Si
Set Calendar On
Total Distance
0
Total Hours
0
TR5000i
Treadmill
625
000
000
35