LifeSpan TR5000i Owner's Manual page 10

Step 1: Unpacking Treadmill
Cut packaging straps and remove.
A.
B. Remove the box top.
C. Remove small parts and packaging material and unwrap parts.
D. Cut corners of the bottom box and remove all packaging material to begin assembly. The
treadmill can be assembled in the box. No need to pick the treadmill up to remove it from box.
Step 2: Handlebar Support Post Assembly
A. Stand the support posts and handlebars up into their operating position and attach the
4 bolts (17) and washers (16). Tighten securely.
B. Attach the left (13) and right (14) base covers using Phillips screwdriver and 2 machine screws
(18) on each side. The 4 base cover attaching screws (18) are located in the hardware bag.
10
16
17
13
18