LifeSpan TR5000i Owner's Manual page 12

Step 4: Assemble Console Components
A. Attach the blue accessory trays (6) to the
bottom of the console housing using 8
self tapping sc rews (G). Preinstalled in
console housing (25).
B. Attach the console (5) to the console
housing (25) using 6 screws (G). These
screws are pre-installed on the back of the
and then reinstalled with the console in
place.
Step 5: Attach Console Assembly
A. Place the console assembly onto the
console housing frame mount (8) and
attach the assembly using the 7
screws (F), preinstalled in console
housing (25). Be sure not to pinch wire
harnesses during this step.
B. Connect all wire harnesses including:
i. Main Harness: 7-pin
ii. Hand Pulse harness: 2-pin
(color doesn't matter.)
iii. Speed Control Harness: 3-pin
(the wire colors need to be
matched.)
iv. Incline Control Harness: 3-pin
(the wire colors need to be
matched)
C. Tuck extra wiring harness into the
opening behind the console.
12
25
G
F
8
Note: Be careful to properly connect all wiring
connectors with their correct corresponding
wiring harness. Pay attention not to bend any
pins and make sure the connectors click in
place.
5
G
6