Loading Film - Royal Sovereign RSC-880LS Owner's Manual

Royal Sovereign films are wound with the adhesive side facing the inside of the roll (adhesive
in).
Loading films to upper and lower film shafts:
(See page 5 for assistance with parts identification.)
1. Adjust the auto grip to fit to the film and tighten the
auto grip screw (Figure 1).
2. Remove the upper and lower film shafts from the machine and
load the films (Center the upper and lower films on the shaft).
Note the direction of the adhesives on the lower and upper
films
(Figure 2).
3. Load the upper and lower film shafts on the machine (Figure
3).

10. LOADING FILM

9 9
Figure 1
Figure 2
Figure 3