Loading Film - Royal Sovereign RSC-5500H Owner's Manual

LOADING fILM

Royal Sovereign films are wound with the adhesive side facing the inside of the roll (adhesive in).
Loading film to upper film shafts:
1. Loosen the stop ring and take down the film shaft, then
load the film and center it on the shaft.
Note: The adhesives should be facing you.
2. Load the film shafts on the machine (figure 3) and
tighten the stop ring to lock the film shaft to the
appropriate location.
RSC-5500H/6500H
9
Figure 1
Figure 2
Figure 3
Figure 4