Assembly; Beginning Assembly; Guide Rails - Grizzly G8690 Instruction Manual

SECTION 4: ASSEMBLY

Beginning Assembly

Disconnect power to the
machine when perform-
ing any maintenance,

assembly

ments. Failure to do this
may result in serious
personal injury.
Most of your Model G8690 has been assembled
at the factory, but some parts must be assembled
or installed after delivery. We have organized the
assembly process into steps. Please follow along
in the order presented here.
TOOLS REQUIRED: A metric socket set, 6"
adjustable wrench, and Phillips
ver.
G8690 Variable Speed Wood Lathe
or adjust-
Keep loose clothing
rolled up and out of the
way of machinery and
keep hair pulled back.
Wear safety glasses
during the entire assem-
bly process. Failure to
comply may result in
serious personal injury.
®
head screw dri-

Guide Rails

Install the two guide rails between the two foot
assemblies and secure in place using the four
setscrews (M6-1 x 10) as shown in Figure 2. .
Figure 2. Guide rails installed.
-9-