Table of Contents
Advertisement
Assembly
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
To assemble machine:
1.
Install tailstock lock lever and M6-1 X 18 quill
lock handle (see Figure 7).
Quill Lock
Handle
Figure 7. Hardware installed in tailstock.
2.
Install tool rest base lock lever and M6-1 x 28
tool rest lock handle (see Figure 8).
Tool Rest Lock Handle
Tool Rest Base Lock Lever
Figure 8. Hardware installed in tool rest base.
Model T32536 (Mfd. Since 10/20)
3.
Figure 9. Tool rest installed in tool rest base.
Tailstock
Lock Lever
Insert tool rest into tool rest base and tighten
tool rest lock handle (see Figure 9).
Note: Unless workpiece clearance is an
issue, always install the larger of the (2) tool
rests included with this machine to give your-
self more room to work.
Tool
Tool Rest Lock Handle
Rest
-15-
Advertisement
Table of Contents
