Lifting & Placing; Assembly; Power Connection - Grizzly G0765 Owner's Manual

Lifting & Placing
Straining or crushing injury
may occur from improperly
lifting machine or some of
its parts. To reduce this
risk, get help from another
person.
With the help of another person, lift the machine
to a suitable location.

Assembly

With the exception of the handwheel handles, the
lathe is shipped fully assembled.
Thread the handles into the cross slide handwheel
and carriage handwheel, (see Figure 14).
Cross Slide
Handwheel
Carriage
Handle
Figure 14. Handwheel handles installed.
-18-
HEAVY LIFT!

Power Connection

Before the machine can be connected to the
power source, all previous setup instructions in
this manual must be completed to ensure that
the machine has been assembled and installed
properly.
Connecting Power
Always make sure the spindle dial on the head-
stock is turned to "0" (rotated fully counterclock-
wise) before connecting power.
Insert the power cord plug into a matching power
supply receptacle.
Disconnecting Power
If you need to disconnect the machine from power
for maintenance, service, or adjustments, turn the
machine OFF and pull the plug completely out of
the receptacle.
Model G0765 (Mfd. Since 5/15)