Assembly - Grizzly G0824 Owner's Manual

Assembly

The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).
With the exception of the handwheels and DRO
unit, the Model G0824 is shipped fully assembled.
To assemble lathe:
1. Thread handles into handwheels, as shown
in Figure 14.
Figure 14. Handwheel handles installed.
-20-
2.
3.
Handwheel
Handles
Secure DRO assembly to threaded mount-
ing holes in headstock cover, using (3)
pre-installed M8-1.25 x 20 cap screws
(see Figure 15).
Figure 15. DRO unit mounted to headstock.
Connect X- and Z-axis cables and power cord
to back of DRO unit, as shown in Figure 16.
DRO Power Z-Axis
Cord
Figure 16. DRO electrical connections.
Model G0824 (Mfd. Since 12/16)
x 3
X-Axis
Cable
Cable