Exit Option - Advantech AIMB-767 User Manual

 Legacy USB Support
Allows you to enable or disable support for legacy USB storage devices, includ-
ing USB flash drives and USB hard drives. Setting to [Auto] allows the system to
detect the presence of USB devices at startup. If detected, the USB controller
legacy mode is enabled. If no USB device is detected, legacy USB support is
disabled. Configuration options:[disabled][enabled][Auto].
 Audio Controller
This item is allow user to set audio controller and suggest to set it as [Auto].
LAN1 GbE controller

Enables or disables the GbE controller.
 OnBoard LAN1 BootROM
 Resume on LAN1
Enables or disables GbE LAN wake up from S5 function.
 SLP_S4# Min. Assertion Width
This item allows you to set a delay of a set number of seconds.
3.2.20

Exit Option

 Save Changes and Exit
When you have completed system configuration, select this option to save your
changes, exit BIOS setup and reboot the computer so the new system configu-
ration parameters can take effect.
1. Select Save Changes and Exit from the Exit menu and press <Enter>.
The following message appears:
2. Select Ok or Cancel.
AIMB-767 User Manual
Save Configuration Changes and Exit Now?
[Ok] [Cancel]
40