Table of Contents
Advertisement
Enhanced parallel port: Configured to LPT1 or disabled. Standard DB-25
female connector provided. Supports EPP/SPP/ECP
Keyboard/mouse connector: Supports standard PS/2 keyboard and mouse
USB port: Supports up to eight USB 2.0 ports with transmission rates up to 480
Mbps. Four ports are on-board pin heaters and four ports are external ports
1.3.4
Graphics
Controller: Chipset integrated VGA controller
Display memory: Dynamically shared system memory up to 352 MB
DVI-D: Up to resolution 1920 x 1200 @ 60 Hz refresh rate
CRT: Up to 2048 x 1536 resolution @ 75 Hz refresh rate
1.3.5
Ethernet LAN
Supporting dual 10/100/1000Base-T Ethernet port s via PCIe x1 bus
Controller: LAN1: Intel 82583V; LAN2: Intel 82583V.
1.3.6
Industrial features
Watchdog timer: This function can reset system when it is triggered. The
watchdog timer is programmable, with units in minutes and seconds (255 lev-
els).
1.3.7
Mechanical and environmental specifications
Operating temperature: 0 ~ 60° C (32 ~ 140° F, depending on CPU).
Storage temperature: -40 ~ 85° C (-40 ~ 185° F)
Humidity: 5 ~ 95% non-condensing.
Power supply voltage: +3.3 V, +5 V, +12 V, -12 V, 5 VSB.
Power consumption:
Maximum: +5 V at 3.12 A, +3.3 V at 0.28 A, +12 V at 2.52 A, +5 VSB at 0.6 A,
-12 V at 0.24 A (Intel Core 2 Quad Q9400 2.66 GHz (1333 MHz FSB), 2 x 2 GB
DDR3 1066 SDRAM)
Board size: 304.8 x 228.6 mm (12" x 9.6")
Board weight: 0.5 kg (1.68 lb)
1.4
Jumpers and Connectors
Connectors on the AIMB-767 motherboard link it to external devices such as hard
disk drives and keyboard. In addition, the board has a number of jumpers used to
configure the system for your application.
The tables below list the function of each of the board jumpers and connectors. Later
sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc-
tions for connecting external devices to your motherboard.
Table 1.1: Jumpers
Label
JCMOS1
JCASE1
PSON1
JSETCOM3
Function
Clear CMOS
Chassis Instruction Connector
AT/ATX mode selector
COM3 RS-232/422/485 Jumper Setting
3
AIMB-767 User Manual
Advertisement
Table of Contents
