Figure 3.1 Main Setup Screen; Introduction; Entering Bios Setup - Advantech AIMB-781 User Manual

3.1

Introduction

AMIBIOS has been integrated into myriad motherboards for decades. In the past,
people often referred to the AMIBIOS setup menu as BIOS, BIOS setup or CMOS
setup.
With the AMIBIOS Setup program, you can modify BIOS settings and control the
special features of your computer. The Setup program uses a number of menus for
making changes and turning the special features on or off. This chapter describes the
basic navigation of the AIMB-781 setup screens.
AMI's BIOS ROM has a built-in Setup program that allows users to modify the basic
system configuration. This information is stored in NVRAM area so it retains the
Setup information when the power is turned off.
3.2

Entering BIOS Setup

Press <Del> or <F2> to enter AMI BIOS Setup Utility, the Main Menu will appear on
the screen. Use arrow keys to select among the items and press <Enter> to accept or
enter the sub-menu.
When users first enter the BIOS Setup Utility, they enter the Main setup screen.
Users can always return to the Main setup screen by selecting the Main tab. There
are two Main Setup options. They are described in this section. The Main BIOS
Setup screen is shown below.
AIMB-781 User Manual

Figure 3.1 Main setup screen

32