Table 2: Rear Panel Vp-719Ds, Seamless Switcher / Scaler Features - Kramer VP-719DS User Manual

# Feature
21 ENTER Button
22 MENU Button
23 DVI
24 VGA
25 Component Press
26 YC2
27 YC1
28 AV2
29 AV1

Table 2: Rear Panel VP-719DS, Seamless Switcher / Scaler Features

# Feature
1 VIDEO HD15
Connector
2 AUDIO L and R RCA
Connectors
3 COMPONENT L and
R RCA Connectors
4 VIDEO 2 L and R
RCA Connectors
5 VIDEO 1 L and R
RCA Connectors
6 PC 3.5 mm Socket
7 DVI Connector
8 VGA HD15 Connector Connects to the VGA (analog interface) graphics source
9
10
11
12 YC 2 4p Connector
13 YC 1 4p Connector
14 CV 2 RCA Connector
15 CV 1 RCA Connector
16 RS-232 DB 9 Connector
17 Power Connector with FUSE AC connector enabling power supply to the unit
1 Or moves to the previous level in the OSD screen
2 See section 6.2
3 Press again (when the LED illuminates) to freeze the image; the LED flashes. Press once again (when the LED flashes), to
display a blank screen; the LED flashes more slowly. Alternatively, to freeze the image, press the FREEZE key on the
infra-red remote control transmitter (see Figure 42)
4 Either CV 2 or YC 2
5 Either CV 1 or YC 1
6 Or to an RGB signal; connect RED to the "Y" connector, GREEN to the "Pb/Cb" connector, and BLUE to the "Pr/Cr" connector
6
Your Seamless Switcher / Scaler
Moves to the next level in the OSD screen
Displays the OSD Menu screen
3
Press to select the DVI / audio source and illuminate the DVI LED
3
Press to select the VGA / audio source and illuminates the VGA LED
3
to select the component video/audio source and illuminate the
component LED
3
Press to select the s-Video (Y/C) / audio source 2 and illuminate the YC2 LED
3
Press to select the s-Video (Y/C) / audio source 1 and illuminate the YC1 LED
3
Press to select the composite video / audio source 2 and illuminate the AV2 LED
3
Press to select the composite video / audio source 1 and illuminate the AV1 LED
Connects to the video acceptor (for example, Plasma display,
projector or monitor) that displays the scaled output (with the OSD
superimposed over it)
Connects to the left and right stereo audio acceptors
Connects to the left and right stereo audio inputs from the
COMPONENT video source
Connects to the left and right stereo audio inputs from one of the
composite or s-Video sources
Connects to the left and right stereo audio inputs from one of the
composite or s-Video sources
Connects to the audio input from either the DVI (digital video
interface) graphics source or the VGA analog graphics source
Connects to the DVI (digital video interface) graphics source
Y
Connect to the component video source
Pb/Cb
Pr/Cr
Connects to the s-Video source 2
Connects to the s-Video source 1
Connects to the composite video source 2
Connects to the composite video source 1
Connects to PC or Serial Controller
Function
1
and locks/unlocks the front panel
Function
4
5
6
KRAMER: SIMPLE CREATIVE TECHNOLOGY
2