Storage Function; Manual Storage Function; Automatic Storage Function - Becker AR6201 Series Installation And Operation Manual

Squelch On (left) / Squelch Off (right)
If the squelch function is active (on), noisy signals will be muted.
The threshold for the squelch can be adjusted in the pilots menu.
3.8

Storage Function

The transceiver has two kind of storage functions implemented:
- Manual storing of frequencies
- Automatically storing of frequencies
3.8.1

Manual Storage Function

Manual storage of frequencies can be activated by pressing "STO" key in standard mode, direct
tune or scan mode.
During storage procedure the display will look similar to the channel mode. But as difference "STO"
is displayed on left side of the display. On the top line active frequency is indicated. On the bottom
line channel number is indicated. If channel is free, then "FREE" is displayed. If channel contains
already an earlier stored frequency "USED" is displayed.
By entering the storage procedure, the transceiver will first propose the next free channel for
storing the active frequency. Beside the proposed channel also every other channel in range 10 to
99 can be selected by turning the rotary knob. For every selected channel "USED" or "FREE" will
be indicated respectively.
By pressing the "STO" key once again, the active frequency will be stored on selected channel,
independent if the channel is "FREE" or "USED". Afterwards transceiver will automatically go back
to previous mode (standard mode / direct tone mode / scan mode).
If during storage procedure no action occurs during 7 seconds the transceiver returns to the
previous mode without storing the frequency.
The stored frequencies can be recalled in channel mode.
3.8.2

Automatic storage function

The transceiver contains an automatic storage function operating in standard mode, direct tune
mode and scan-mode.
When changing to a new active frequency, the previous active frequency is stored in memory
channel CH01. The frequencies previously located in CH01, CH02 ... CH08 are shifted to memory
DV 14300.03/.04 Issue 2 10/2010
AR6201
"FREE" and "USED" channel indication.
Page 3-9