Frequency Storage Functions - Becker AR6201 Operating Instructions Manual

Operating Instructions
Frequency Selection Modes
118.005
IC
127.000
SQL
118.005
128.000
SQL
118.005
128.000
SQL
118.005
128.000
SQL
•
20
• Push the "MDE" key to change to the standard mode page.
The active frequency is shown in the top line and preset
o
frequency in the bottom line.
• The change of the active frequency is not possible in standard
mode (only available in direct tune mode).
• The change of the preset frequency is possible.
• Make a "short push" on the rotary encoder to change the
MHz digits.
o The changeable digits are shown inverted.
• Turn the rotary encoder clockwise/counter clockwise to change
the frequency in 1 MHz steps.
• Make another "short push" on the rotary encoder to change the
100 kHz digits.
The changeable digits are shown inverted.
o
• Turn the rotary encoder clockwise/counter clockwise to change
the frequency in 100 kHz steps.
• Make another "short push" on the rotary encoder to change the
25/8.33 kHz digits.
o The changeable digits are shown inverted.
• Turn the rotary encoder clockwise/counter clockwise to change
the frequency in 25/8.33 kHz steps.
• A short push of the "↨/SCN" key, exchanges active frequency to
preset frequency and vice versa.
o While the transceiver operates in transmit mode, the
exchange function is disabled.
Push the "STO" key to store the active frequency into the next
vacant memory position of the user channel database (see
"Frequency Storage Functions", page 24).
VHF Transceiver 0638.420-071 Issue 06 02/2021
Becker Avionics