Automatic Storage Function; Delete Data - Becker AR6201 Operating Instructions Manual

Operating Instructions
Frequency Selection Modes
Label (Identifier) Data:
125.875
STO
_ _ _ _ _ _ _ _ _ _

2.5.3.4. Automatic Storage Function

The transceiver stores recently selected frequencies. Named and callable as
LAST 1...LAST 9 (see "Channel Mode", page 18).
Note The functions "LAST" and Store/Restore are only available if
they are activated in "Configuration Settings*"
("MEM OPTIONS").
* For details please refer to manual:
http://www.becker-avionics.com/downloads/

2.5.3.5. Delete data:

The stored content in user channel database can only be deleted in
"Configuration Settings*". Please note, all stored data in channel database will be
reset.
* For details please refer to manual:
http://www.becker-avionics.com/downloads/
22
• By turning the "ROTARY ENCODER" characters can be
selected.
• Selection works in both directions
(example: blank  A ...Z  0  9  —  /  blank A
by turning clockwise or counter clockwise).
• A short press on the "ROTARY ENCODER", the cursor is
passed to the next position.
• A short press of the "STO" key stores the label.
• A long press of the "STO" key clears the currently edited
label.
• After storing the transceiver returns back to the previous
selection mode.
• If no action occurs in label editing mode within 7 seconds,
the transceiver returns to the previous selection mode
without storing the frequency and label information.
• Stored frequencies are callable in channel mode (see
"Channel Mode", page 18).
• When changing to a new active frequency, the previous
active frequency is stored in memory as LAST 1.
• The frequencies previously located in LAST 1...LAST 8
are shifted to memory channels LAST 2...LAST 9.
→ AR620X Family.
→ AR620X Family.
VHF Transceiver 620X 0638.420-071 Issue 04 12/2016