Automatic Storage Function; Scan Mode - Becker AR6201 Operating Instructions Manual

Operating Instructions
Frequency Selection Modes
Each "short press" on the "ROTARY ENCODER", the cursor is passed to
the next position. A short press of the "STO" key stores the label a long
press of the "STO" key clears the currently edited label. After storing the
transceiver returns back to the previous frequency selection mode.
If no action occurs in label editing mode within 7 seconds, the transceiver
returns to the previous frequency selection mode without storing the
frequency and label information.
Stored frequencies are recallable in Channel Mode (see "Channel Mode"
page 17).

Automatic Storage Function

2.5.5.
The transceiver stores 9 recently selected frequencies and updates the last
channels database during operation in "Standard Mode", "Direct Tune
Mode" and "Scan Mode".
When changing to a new active frequency, the previous active frequency is
stored "LAST" in memory LAST 1. The frequencies previously located in
LAST 1...LAST 8 are shifted to memory channels LAST 2...LAST 9. This
algorithm ensures the last 9 used active frequencies are available. Last
used frequencies "LAST" can be recalled in channel mode (see "Channel
Mode" page 17).
Note The functions "LAST" and Store/Restore to channels
are only available if these options are activated in
"Configuration Settings" - "MEM OPTIONS".
Delete data:
2.5.5.1.
The stored content in User Channel Database can only be deleted in
"Configuration Settings". Please note the whole channel database will be
reset.

Scan Mode

2.5.6.
In Scan Mode the display shows both the active frequency on the top line
and the preset frequency on the bottom line. The SCAN sign in the display
indicates that scan function is active.
20
118.005
127.000
SQL
SCAN
VHF Transceiver Family 620X 0638.420-071 Issue 03 July 2015