Becker Avionics
2
Installation
This manual must be available during performance of all tasks.
The installation of the device(s) depends on the type of aircraft and its equipment and therefore only
general information can be given in this section.
Any deviations from the instructions in this document are under own responsibility.
2.1
2.2
Device Assignment ..................................................................................................................... 30
Scope of Delivery .............................................................................................................. 30
State of Delivery ................................................................................................................ 30
Type Plate ......................................................................................................................... 31
Meaning of Status LEDs ................................................................................................... 31
2.3
Installation Requirements ............................................................................................................ 32
Mounting Distance ............................................................................................................ 33
Mounting Tray MT6512 ..................................................................................................... 33
Grounding ......................................................................................................................... 33
Antenna Cables ................................................................................................................ 34
Antenna Installation .......................................................................................................... 35
2.4
Dimensions.................................................................................................................................. 37
RT6512 ............................................................................................................................. 37
2.5
Connector Pin Assignments ........................................................................................................ 39
Connector P1 (RT6512) .................................................................................................... 39
Connector J2 (RT6512) .................................................................................................... 40
2.6
RT6512 with RCU6512 ..................................................................................................... 41
RT6512 with RMU5000..................................................................................................... 41
2.7
Aircraft Wiring .............................................................................................................................. 42
2.8
Post Installation Tests ................................................................................................................. 47
Power Supply .................................................................................................................... 47
Antenna Check ................................................................................................................. 47
Interference Check ............................................................................................................ 47
Flight Test Check .............................................................................................................. 49
2.1
Packaging, Transport, Storage
Visually inspect the package contents for signs of transport damage.
The packaging material or parts of it are inflammable. If disposed improperly, by
burning, toxic fumes may develop.
Keep the packaging material and use it in the case of a return shipment. Improper or faulty packaging
may lead to transport damages.
Make sure to transport the device always in a safe manner and with the aid of suitable lifting
equipment if necessary. Do never use the electric connections for lifting. Before the transport, a clean,
level surface should be prepared to put the device on. The electric connections may not be damaged
when placing the device.
DV17501.03 Issue 07 November 2019
RT6512
Installation
Packaging, Transport, Storage
29