Becker Avionics
3.6.4.2
Label (Identifier) Data
125.875
STO
_
_ _ _ _ _ _ _ _ _
Automatic Storage Function
The transceiver stores recently selected frequencies. Named and callable as LAST 1...LAST 9
(see "Channel Mode" page 130).
Notice:
The functions "LAST" and Store/Restore are only available if they are enabled in
the configuration setup* - (page "MEM OPTIONS").
* (Details see "Configuration Setup" page 69).
3.6.5.1
Delete data
The stored data in the user channel database can only be deleted in the configuration setup*.
Please notice the whole channel database will be reset.
* (Details see "Configuration Setup" page 69).
DV14307.03 Issue 06 February 2021
Turn the rotary encoder to select the characters.
•
The selection works in both directions
o
(example: blank A ...Z 0 9 — / blank A with a
turn clockwise or counter clockwise).
o
A short push on the rotary encoder and the cursor is on the next
position.
A short push on the "STO" key stores the label.
o
o
A long push on the "STO" key clears the label.
•
When the change is stored the transceiver changes to the before
selected mode.
If no action occurs in label editing mode in 7 seconds, the transceiver
•
changes to the before selected mode without storage the frequency and
label information.
Stored frequencies are callable in channel mode (see "Channel Mode"
•
page 130).
Whit the change to a new active frequency, the before selected active
•
frequency is stored in memory as LAST 1.
•
The frequencies stored in LAST 1...LAST 8 are shifted to memory
channels LAST 2...LAST 9.
Transceivers 6200 Series
133