Table of Contents
Advertisement
Computer Input
Computer System Selection
This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA,
WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as
a signal source, this projector automatically detects the signal format and tunes to project a proper
image without any additional setting. (Signal formats provided in this projector is shown on page 62)
One of the following messages may appear when:
Th e p r o j e c t o r c a n n o t r e c o g n i ze t h e
Auto
c o n n e c t e d s i g n a l c o n fo r m i n g t o t h e
provided PC Systems. The message "Auto"
is displayed on the PC System Menu icon
and the Auto PC Adjustment function works
to display proper images. If the image is
not projected properly, a manual adjustment
is required. (p.28, 29)
There is no signal input from computer.
-----
C h e ck t h e c o n n e c t i o n b e t we e n yo u r
c o m p u t e r a n d t h e p r o j e c t o r. ( S e e
"Troubleshooting" on page 57 .)
The preset system is manually adjusted in
Mode 1
the PC Adjust Menu. The adjusted data can
be stored in Mode 1 ~ 5. (p.28, 29)
PC Systems provided in this projector is
SVGA 1
chosen. The projector chooses a proper
system provided in the projector and
displays it.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC system can also be selected manually.
1
Press the MENU button to display the On-Screen
Menu. Press the Point
red framed pointer to the PC System Menu icon.
2
Press the Point
pointer to the system that you want to set, and
then press the SELECT button.
26
26
buttons to move the
7 8
buttons to move the red arrow
ed
PC System Menu
The Auto PC Adjustment
function operates to adjust
the projector.
PC System Menu
The PC System Menu icon
Selected system is displayed.
Systems on this dialog
box can be selected.
Custom Mode (1 ~ 5) set in
the PC Adjust Menu. (p.27 , 29)
Advertisement
Table of Contents
