Connecting To A Computer - Panasonic PLC-XU75A Owner's Manual

Connecting to a Computer

Cables used for connection
• VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.)
• Audio Cables (Mini Plug: stereo)
(*One cable is supplied; other cables are not supplied
with the projector.)
Audio Output
Audio cable
(stereo)
COMPUTER/
COMPONENT
AUDIO IN
✔
Note:
• Input sound to the COMPUTER/COMPONENT
AUDIO IN terminal when using the COMPUTER
IN 1/COMPONENT IN and the COMPUTER IN 2/
MONITOR OUT terminal as input.
• When connecting the AUDIO OUT to external
audio equipment, the projector's built-in speaker is
disconnected.
• When the cable is of the longer variety, it
is advisable to use the COMPUTER IN 1/
COMPONENT IN and not the COMPUTER IN 2/
MONITOR OUT.
Monitor Output
Monitor Output
or
Monitor Input
VGA cable
COMPUTER IN 1/ COMPUTER IN 2/
COMPONENT IN MONITOR OUT
VGA cable
This terminal is switchable.
Set up the terminal as either
Computer input or Monitor
output. (See Page 47 .)
Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.
Installation
External Audio Equipment
Audio Input
Audio cable
(stereo)
AUDIO OUT
(stereo)
15
15