Table of Contents
Advertisement
System
System
PC System Selection
Auto
This projector automatically tunes to various types of computers
based on VGA, SVGA, XGA, SXGA, UXGA, or WXGA with its Multi-
scan system and Auto PC Adjustment. If Computer source is
selected in the Source Select Menu, this projector automatically
detects the signal format and tunes to project a proper image
without any additional setting. (Signal formats provided in this
projector is shown on pages 70~71 )
✔
Note:
The projector may display one of the following messages.
User preset system manually adjusted in PC Adjust
Mode 1
menu. Adjustment data can be stored in Mode 1~50.
(p.41~42)
PC Systems provided in the projector. The projector
SVGA 1
chooses a proper system and displays it.
There is no signal input from computer. Check the
-----
connection of your computer and the projector. (See
"Troubleshooting" on page 68)
*SVGA 1 and Mode 1 are examples.
Selecting PC System Manually
When the projector has difficulty in recognizing the connected
signal conforming to PC Systems provided in this projector,
several systems are displayed. Select one from them manually.
When the image is not projected properly, manual adjustment is
required. (p.41~42)
1
Press the MENU button to display On-Screen Menu. Spin
Menu icons with the Point buttons (7 and 8) or the Control
pad and press the SELECT button when the SYSTEM icon
comes right in front.
2
Move the yellow frame pointer with the Point buttons (e
and d) or the Control pad to a proper system, and then
press the SELECT button.
38
selects system of the connected computer and video source.
PC System Menu
The system being selected.
System icon
Custom Mode
(1~50) set in the
PC Adjust Menu.
(p41, 42)
Advertisement
Table of Contents
